建材灌装机

建材灌装机

设备特征：
       1.本机采用可编程控制器（PLC)、高速工控组态软件进行实时监控的控制，使用调节方便。
       2.每个灌装头都有称重和反馈系统，能对每个头的灌装量进行灌装量设置和单个微量调整。
       3.光电传感器、接近开关等都是先进的传感元件，做到无桶不灌装、 堵桶主机会自动停机并报警。
       4.灌装方式为下潜式，可有效减少泡沫的产生，可以满足不同特性物料的灌装。
       5.整机按GMP标准要求制作，各管路连接采用快装方式，拆卸清洗方便，与物料接触部位及外露部位均采用优质不锈钢制造。整机安全、环保、安全、美观、能适应各种不同环境工作。

Equipment features：
       1. This machine adopts PLC, high speed software to implement real time control, easy to use and adjust.
       2.Each filling head has a weighing and feedback system which can set the filling amount of each head and achieves fine tune.
       3.Photoelectric sensor, proximity switch and so on are advanced sensor components, including realizing no pail no filling, the filling system will pause automatically and send an alarming signal when there is pail jam.
       4. The diving filling can effectively reduce the foam and fulfill different meterials which has different characteristics.
       5. GMP standard, stainless steel structure, environmental protection, safety and good looking, it's suitable for different working environment and all pipe connections are covnenient to dismantle and clean.

设备参数：
Equipment parameters：

设备型号Model	MCYT-CZ-8T	MCYT-CZ-6T	MCYT-CZ-4T	MCYT-CZ-2T
头数 Head option	8	6	4	2
适用瓶型 Applicable bottle Type（mm）	L:160～360, W:100～300, H:250～500 Φ:≥40
生产能力Capacity (bottle/h)	30kg:600瓶/小	30kg:520瓶/小时	30kg:450瓶/小时	30kg:240瓶/小时
灌装范围Filling deviation range(g)	≤±0.3	≤±0.3	≤±0.3	≤±0.3
设备尺寸	4500×1700×2300	3500×1700×2300	2500×1700×2300	1500×1700×2300